Release: 1.0a 17 / 24
Supermicro Switch Web GUI Quick Configuration Guide
Fig 9: File Management Page
2.10 Upgrading Firmware
Switch firmware can be upgraded in the System Mgmt
Firmware Upgrade page.
Flash Area – The default selection is Normal to upgrade firmware in normal flash area. To
upgrade firmware in the fallback flash area, choose Flash Area as the Fallback.
File Name – Use the Browse button to select the switch firmware from local computer.
When switches are in the stacking mode, it is only necessary to upgrade the firmware of one
switch – firmware will be upgraded in all other stack members automatically.
To Next Page
Loading...
