Supermicro SSE-G24-TG4 - Configuring Port Channel Parameters

Release: 1.0a 24 / 24
Supermicro Switch Web GUI Quick Configuration Guide
Fig 15: Port Channel Ports Page
For example to configure the ports gi 0/15 and gi 0/16 with static port channel 10, do the following
steps.
 Check the check box for the port gi 0/15 and gi 0/16.
 Choose the port channel as po10 for both port gi 0/15 and gi 0/16.
 Choose the mode as “On” for both ports gi 0/15 and gi 0/16.
 Click on Apply button.
4.4 Configuring Port Channel Parameters
Once a port channel is created and associated with the required ports, you can configure the port
channel parameters.
If necessary configure the MTU of the port channel in the Port Channel page (Fig 14). The default
value is 1500.
If necessary configure the name or description of the port channel in the Port Channel page (Fig
14).
Make the port channel Admin Status as “UP” in the Port Channel page (Fig 14).
Add the port channel to any required vlans in the VLAN page (Fig 12).