Supermicro SSE-G24-TG4 - 4 Link Aggregation; Enabling la Status

Release: 1.0a 22 / 24
Supermicro Switch Web GUI Quick Configuration Guide
4 Link Aggregation
Supermicro switches support both static port channel link aggregation and dynamic LACP link
aggregation.
Configure port channel or link aggregation as follows:
 Enable LA Status
 Create a port channel
 Associate the port channel you have created with the required ports
 Configure any port-channel-specific parameters
4.1 Enabling LA Status
LA status can be enabled in Layer2 Mgmt  LA  Basic Settings page.
Fig 13: LA Status Page