Supermicro SSE-G24-TG4 - Creating a Port Channel; Associating a Port Channel with Ports

Release: 1.0a 23 / 24
Supermicro Switch Web GUI Quick Configuration Guide
4.2 Creating a Port Channel
A port channel can be created in the Layer2 Mgmt  LA  Interface Settings page.
Fig 14: Port Channel Page
To create any port channel, enter the Port Channel ID in the page-top dialog box and click Add.
4.3 Associating a Port Channel with Ports
Once a port channel is created in the port channel page, it can be associated with the required
physical ports. This can be done in the Layer2 Mgmt
 LA  Port Settings page.
Configure Port Channel and Mode for the required physical ports.
Use the mode “ON” for static port channels. Use the mode as “ACTIVE” or “PASSIVE” for LACP
port channels.