Supermicro L2/L3 Switches Configuration Guide
copy tftp://ip-address/filename flash: filename
copy flash: filename flash: filename
copy usb: filenametftp://ipaddress/filename
copy tftp://ip-address/filenameusb: filename
copy usb: filenameusb: filename
Copies a remote file to a local flash.
Makes a copy of the file in the flash
memory.
Copies an external USB flash file to a
remote TFTP server in SSE-X24S, SSE-
X3348S or SSE-X3348T switches.
Copies a remote file to external USB
memory in SSE-X24S, SSE-X3348S or
SSE-X3348T switches.
Makes a copy of the file in the USB
external memory in SSE-X24S, SSE-
X3348S or SSE-X3348T switches.
filename – name of the configuration
file.
The example below shows the commands used to copy a file to another file in a remote site/flash.
SMIS# copy flash:config1.txt flash:switch1.conf
Copied flash:/mnt/config1.txt ==> flash:/mnt/switch1.conf
SMIS#
1.9.6 Deleting Saved Configurations
Supermicro switches allow users to delete the switch startup configuration and other stored
configuration files.
To Next Page
Loading...
