WIT.RU
WIT Company – поставка серверов, СХД,
сетевого оборудования, лицензионного ПО
Chapter 3: System Interface
3-4 3-5
SUPERSERVER 1028R-TDW USER'S MANUAL
NIC2
Indicates network activity on LAN2 when ashing.
NIC1
Indicates network activity on LAN1 when ashing.
HDD
Indicates IDE channel activity when ashing.
2
1
3-4 Hard Drive Carrier LEDs
Each hard drive carrier has two LEDs.
• Green: When illuminated, the green LED on the front of the drive carrier
indicates drive activity. A connection to the drive backplane enables this LED to
blink on and off when that particular drive is being accessed.
• Red: The red LED indicates two states. When blinking, it indicates the drive is
rebuilding. When solid, it indicates a drive failure. If a hard drive fails, you should
be notied by your system management software. Please refer to Chapter 6 for
instructions on replacing failed hard drives.
Power
Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
To Next Page
Loading...
