Supermicro SUPERSERVER 1028R-TDW - 5-11 Onboard Indicators; 5-12 SATA Ports

WIT.RU
WIT Company – поставка серверов, СХД,
сетевого оборудования, лицензионного ПО
Chapter 5: Advanced Serverboard Setup
5-255-24
SUPERSERVER 1028R-TDW User's Manual
5-11 Onboard Indicators
LAN Port LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. One
LED indicates activity when blinking
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
LAN LED
Connection Speed Indicator
LED Color Denition
Off No connection or 10 Mb/s
Green 100 Gb/s
Amber 1 Gb/s
Dedicated IPMI LAN LEDs
In addition to LAN1 and LAN2, the
X10DDW-i has a dedicated IPMI LAN
port located on the I/O backpanel. The
amber LED indicates activity, while the
Link LED indicates the speed of the
connection. See the table on the right
for more information.
Activity LEDLink LED
Onboard Power LED
An Onboard Power LED is located at
LE1 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table on the
right for more information.
Onboard PWR LED Indicator
LED States
LED Color Denition
Off Normal Power Off (w/
power cable connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDM1 on the serverboard. When
LEDM1 is blinking, the BMC is func-
tioning normally. See the table on the
right for more information.
BMC Heartbeat LED
States
Color/State Denition
Green:
Blinking
BMC: Normal
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Denition
Link (Left) Green: Solid 100 Mbps
Amber 1 Gbps
Activity
(Right)
Amber: Blink-
ing
Active
5-12 SATA Ports
SATA Port Pin Denitions
Pin # Denition
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
SATA Ports
Ten SATA ports are provided on the
serverboard. I-SATA0-3, I-SATA4
and I-SATA5 are supported by the
Intel PCH and the S-SATA ports
0-3 are supported by Intel SCU.
Note also that I-SATA4/5, colored
in yellow, are used with Supermicro
SuperDOM (Disk-on-Module) con-
nectors with built-in power-pins. Su-
perDOMs are backward-compatible
with regular SATA HDDs and SATA
DOMs. See the table on the right for
pin denitions.
Note: For more information on SATA
HostRAID conguration, please refer
to the Intel SATA HostRAID User's
Guide posted on our website at www.
supermicro.com.