1-3
Chapter 1: Introduction
Onboard Controllers/Ports
One Fast UART 16550 port, a single Infi niBand connector with FDR/QDR support
1028TR-TF only), a VGA (monitor) port, an IPMI dedicated LAN port and two
Ethernet ports, and two USB 2.0 ports (additional one internal USB Type-A
connector is included on the serverboard) are all available on the IO back panel.
Note: For IPMI Confi guration Instructions, please refer to the Embedded BMC
Configuration User's Guide available @
http://www.supermicro.com/support/
manuals/.
Graphics Controller
The X10DRT-L/LIBF features an integrated ASpeed 2400 BMC Video Controller.
Infi niBand
The server include an FDR (fourteen data rate) speed Infi niBand QSFP connector.
InfiniBand is a scalable serial communications link intended for connecting
processors with high-speed peripherals.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and
CPU overheat sensors, virus protection, node manager software and BIOS rescue.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC809 server chassis.
System Power
Each SC809 chassis model includes a high-effi ciency Titanium level certifi ed
power supply, rated at 1000 Watts. In the unlikely event your power supply fails,
replacement is simple and can be accomplished without tools.
Note: The power supply is hot-plug.
To Next Page
Loading...
