2-8
SUPERSERVER 1028TR-T/TF User's Manual
Installing the Chassis into a Rack
Rack Installation
1. Confi rm that chassis includes the inner rails (A) and rail extensions (B). Also,
confi rm that the outer rails (C) are installed on the rack.
2. Align the chassis rails extentions (B), with the front of the rack rails (C).
3. Slide the chassis rail extensions into the rack rails, keeping the pressure even
on both sides. (You may have to depress the locking tabs when inserting.)
When the server has been pushed completely into the rack, you should hear
the locking tabs "click" into position.
4. (Optional) Insert and tightening the thumbscrews that hold the front of the
server to the rack.
Note: Figures are for illustrative purposes only. Always install servers into racks from
the bottom up.
Figure 2-4. Installing the Rack Rails
1
A
1
B
1
C
To Next Page
Loading...
