Supermicro SUPERSERVER 1028TR-T - 6-7 Installing Hard Drives

6-6
SUPERSERVER 1028TR-T/TF User's Manual
Figure 6-5. System Fan Placement
1
6
6-7 Installing Hard Drives
The SC809 has two sets of four hard disk drives (eight total) which are mounted
in drive carriers and reside within the the hard drive bays. These drives are hot-
swappable and can be removed or replaced without powering down the chassis.
Recommended for SAS or enterprise SATA HDDs only
Caution: Except for short periods of time (swapping hard drives), do not operate
the server with the carriers abscent.
Removing Hard Drives and their Carriers from the Hard Drive Bays
1. Press the release button on the drive carrier. This extends the drive carrier handle.
2. Use the handle to pull the drive and its carrier out of the chassis.