B-1
Appendix B: System Specifi cations
Appendix B
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
Processors
Two E5-2600 v3 Series processors per node in Socket R3-LGA 2011 type
sockets
Note: please refer to our website for details on supported processors.
Chipset
One C612 chipset per node
BIOS
16 MB SPI AMI BIOS® SM Flash UEFI BIOS per node
Memory Capacity
The X10DRT-L/LIBF has eight (8) DIMM slots supporting up to 256 GB of
DDR4 (288-pin) ECC 2133/1866/1600 MHz speed RDIMM registered ECC or
512 GB of DDR4 (288-pin) ECC 2133/1866/1600 MHz speed LRDIMM SDRAM
in 512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB or 64 GB sizes at 1.2V
voltages.
Note: refer to Section 5-6 for details on installation.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory support
information.
SATA Drive Bays
The SuperServer 1028TR-T/TF contains four (4) hot-swap drive bays per node
to house four standard SATA drives, eight total.
PCI Expansion
The SuperServer 1028TR-T/TF has one (1) PCI-Express 3.0 x16 slot available
per node.