5-26
SUPERSERVER 1028TR-T/TF User's Manual
BMC Heartbeat LED
Status
Color/State Defi nition
Green: Blinking BMC:Normal
IPMI Dedicated LAN LEDs
In addition to the LAN Port 1, an IPMI
Dedicated LAN is also located on the I/O
Backplane. The amber LED on the right
indicates connection and activity; while
the green LED on the left indicates the
speed of the connection. See the tables
at right for more information.
IPMI LAN
Link/Speed LED (Left)
& Activity LED (Right)
LED Color/Status Defi nition
Link (Left)
Green: Solid 100 Mbps
Amber: Solid 1 Gbps
Activity (Right) Orange: Blinking Active
IPMI LAN
Activity LEDLink LED
Onboard Power LED
The Onboard Power LED is located at
LEDPWR on the motherboard. When
this LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or installing
components. See the tables at right for
more information.
Onboard PWR LED Indicator
LED States
LED Color Defi nition
Off System Off (PWR cable
not connected)
Green System On
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDBMC on the motherboard. When
LEDBMC is blinking, the BMC is
functioning normally. See the table at
right for more information.
Note: Refer to Page 2-20 for information on the rear UID LED (LE1).
HDD LED
An HDD LED is located at LE8 on the
motherboard. When LE8 is on, the HDD
is active. See the table at right for more
information.
HDD LED Indicator
LED States
LED Color Defi nition
Off HDD is Inactive
On HDD Active/Normal
To Next Page
Loading...
