6-10
SUPERSERVER 1028TR-T/TF User's Manual
5. Secure the motherboard to the chassis using the rounded, Phillips head
screws. Each motherboard requires fi ve screws.
6. Repeat steps 3 - 5 for the second side of the chassis.
7. Secure the CPUs, heatsinks, and other components to the motherboards as
described in the motherboard documentation.
8. Connect the cables between the motherboard, backplane, chassis, front
panel, and power supply, as needed. Also, fans may be temporarily removed
to allow access to the backplane ports.
9. Replace the expansion card bracket and secure the bracket with a screw.
Figure 6-9. Motherboard Installation
Remove
Screws
Chassis
Standoffs
To Next Page
Loading...
