Supermicro SuperServer 1029P-MT - Page 27

27
Chapter 3: Maintenance and Component Installation
A
A
B
B
C
C
Pin 1
Align CPU Pin 1
CPU (Upside Down)
w/CPU LGA Lands up
CPU/Heatsink Package
(Upside Down)
Align Notch C of the CPU
and Notch C of the Processor Clip
Align Notch B of the CPU
and Notch B of the Processor Clip
Figure 3-3. Processor Package Assembly for the non-F Model Processors
A
B
C
Allow Notch C to
latch on to CPU
Allow Notch B to
latch on to CPU
A
A
C
C
D
D
Pin 1
Align CPU Pin 1
Align Notch C of the CPU
and Notch C of the Processor Clip
Align Notch D of the CPU
and Notch D of the Processor Clip
CPU (Upside Down)
w/CPU LGA Lands up
CPU/Heatsink Package
(Upside Down)
B
B
Align Notch B of the CPU
and Notch B of the Processor Clip
Figure 3-4. Processor Package Assembly for the F Model Processors
A
B
D
Allow Notch D to
latch on to CPU
Allow Notch B to
latch on to CPU
Allow Notch C to
latch on to CPU
C