Supermicro SuperServer 1029P-MT - Hard Drive Carrier Indicators

SuperServer 1029P-MT/MTR User's Manual
38
Figure 3-11. Mounting a Drive in a Carrier
Hard Drive Carrier LED Indicators
LED State/Condition Indication
Green Blinking Indicates drive activity
Red Solid on Indicates drive failure
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at http://www.

Removing a Drive from a Drive Carrier
1. Remove the screws that secure the hard drive to the carrier and separate the hard drive
from the carrier.
2. Replace the carrier back into the drive bay.
Hard Drive Carrier Indicators
Each hard drive carrier has two LED indicators: an activity indicator and a status indicator. In

