Supermicro SuperServer 1029P-MT - Page 73

Chapter 6: BIOS
73
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable hot plug support for PCIe root ports 3A~3D. The options
are Disable and Enable.
Intel® VMD for Volume Management Device on CPU2
VMD Cong for PStack2
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the item "Intel VMD for Volume Management Device" above is set to Enable,
the following items will be dislayed:
CPU SLOT3 PCI-E 3.0 X16 VMD (Available when the device is detected by
the system)
Select Enable to use the Intel Volume Management Device Technology for this spe-
Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable hot plug support for PCIe root ports 3A~3D. The options
are Disable and Enable.
PCI-E Completion Timeout Disable
Use this feature to enable PCI-E Completion Timeout support for electric tuning. The
options are Yes, No, and Per-Port.
South Bridge
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled and Dis-
abled. Default setting is Enabled.
XHCI Hand-off
When disabled, the motherboard will not support USB 3.0. Options are Enabled and
Disabled. Default setting is Disabled.
Port 60/64 Emulation
This feature allows legacy I/O support for USB devices like mice and keyboards. The
options are Enabled and disabled. Default setting is Enabled.