16
SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
Connector Description
SATA5 SATA3.0 port with power-pin built-in w/support of SuperDOM (Device-On Module)
S-SATA 0-3, 4-7 SATA3.0 connections supported by Intel SCU
USB0 Type A internal USB 2.0 header (USB Port 0)
USB1/2, 3/4 Backplane Universal Serial Bus (USB) 3.0 ports 1/2, 3/4
VGA VGA Port
Notes: For the HFI sideband carrier card to function properly, please install the HFI card to an
appropriate PCI-E slot of your choice, and install an F model processor in the corresponding
CPU socket (JHFI1: for CPU1, JHFI2: for CPU2). 2. Connect an HFI cable from the HFI card
to JHFI (HFI header) and connect an IFP cable from HFI card to the processor. (See Chapter
3 for more info.)
To Next Page
Loading...
