52
SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
Chapter 4
Motherboard Connections
LEDs on the motherboard are also described here. A serverboard layout indicating component
locations may be found in Chapter 1.
Please review the Safety Precautions in Chapter 3 before installing or removing components.
Data Cables
you disconnect any of these cables, take care to re-route them as they were originally when
reconnecting them.
Important! Make sure the cables do not come into contact with the fans.
4.1 Power Connections
SMCI-Propietary Power Connectors
Four SMCI proprietary power supplies are located at JPW19/JPW20 and JPW21/JPW22 on the
motherboard. This connectors are reserved for an SMCI proprietary server use only.
Important: To provide adequate power to the motherboard, connect all the 8-pin power
connectors to the power supply. Failure to do so may void the manufacturer's warranty on your
power supply and motherboard.
12V 8-pin System GPU Power Connectors
Sixteen 8-pin 12V power GPU connectors are located at (JPWR1-JPWR8, JPWR9-JPWR16)
on the motherboard to provide power to system and GPU components. Refer to the table
12V 8-pin GPU Power
Pin Denitions
Pin# Denition
1 - 4 Ground
5 - 8 +12V
To Next Page
Loading...
