Supermicro SuperServer 4029GP-TRT - 4.3 Ports and Headers

56
SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
Ethernet Ports
Two Ethernet ports (LAN1, LAN2) that support 10 GbE LAN connections are located on the
I/O backplane. Additionally, a dedicated IPMI LAN, supported by the ACT2500 Baseboard
Controller (BMC), is located above USB 1/2 ports on the backplane. The IPMI LAN supports
1 GbE Connection. All these Ethernet LAN ports accept RJ45 type cables. Please refer to
the LED Indicator Section for LAN LED information.
I/O Back Panel
Port Descriptions
Pin# Denition Pin# Denition
1 USB 1 (3.0) 6 LAN Port 1
2 USB 2 (3.0) 7 LAN Port 2
3 IPMI_LAN 8 VGA
4 USB 3 (3.0) 9 UID Switch
5 USB 4 (3.0)
4.3 Ports and Headers
Rear I/O Ports

of the motherboard.
Figure 4-2. Rear I/O Ports
1
5
4
3
2 76 8 9
VGA Port
The onboard VGA port is located next to LAN Port 2 on the I/O back panel. Use this connection
for VGA display.