SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
36
Memory Installation
ESD Precautions
Electrostatic Discharge (ESD) can damage electronic com ponents including memory modules.
To avoid damaging your DIMM modules, it is important to handle it very carefully. The following
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Handle the memory module by its edges only.
• Put the memory modules into the antistatic bags when not in use.
• Check the Supermicro website for recommended memory modules
Introduction to Intel® Optane DC Persistent Memory
Intel® 82xx/62xx/52xx/42xx supports new DCPMM (Optane™ DC Persistent Memory
than the existing memory modules and provides hyper-speed storage capability for high
Memory Support
The X11DPG-OT-CPU supports up to 6 TB of 3Ds Load Reduced DIMM (3Ds LRDIMM) Load
Reduced DIMM (LRDIMM), 3Ds Registered DIMM (3Ds RDIMM) Registered DIMM (RDIMM),
DDR4 (288-pin) ECC 2933/2666/2400/2133 MHz memory modules in 24 slots. Populating
these DIMM modules with a pair of memory modules of the same type and size will result in
interleaved memory, which will improve memory performance.
Note: 2933 MHz memory is supported by the 82xx/62xx series processors only.
To Next Page
Loading...
