58
SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
Connectors
(I-)SATA 3.0 and (S-)SATA 3.0 Connections
This motherboard contains one (I-)SATA 3.0 port (SATA5) and two S-SATA 3.0 headers
(JS1/JS2). The S-SATA headers, supported by Intel SCU, provide eight S-SATA connections
(S-SATA 0-3, 4-7), while SATA5, supported by the Intel PCH, can be used with the Supermicro
SuperDOM. SuperDOM, a yellow SATA DOM connector with a power pin built in, does not
require a power cable and is backward-compatible with a regular SATA HDD or a third-party
SATA DOM that requires external power cables for power supply.
PCI-E M.2 Slot
This motherboard has one PCI-E M.2 slot. M.2 was formerly Next Generation Form Factor
(NGFF) and serves to replace mini PCI-E. M.2 allows for a variety of card sizes with increased
x4 (32 Gb/s) SSD cards in the 2280 and 22110 form factors.
A Holder
B Holder Mount
C Card Holder Mount
Turn 90 degrees
to lock
Locked position
with M.2 card
Locked position
Locked position
D Plastic screw
STOP
Turn 90 degrees
to lock
A+B+C
A+B+D
Press in here
B
D
A
B
C
A
Rectangle hole
on MB
Copyright © 2017 by Super Micro Computer, Inc. All rights reserved.
Hole Location on the MB 42
M.2 Card 80 A+B+C
M.2 Card 110 A+B+C
To Next Page
Loading...
