Supermicro SuperServer 4029GP-TRT - Page 60

60
SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to

Chassis Intrusion
Pin Denitions
Pin# Denition
1 Intrusion Input
2 Ground
Serial Port
A serial port header is located at COM1 on the motherboard. This header provides serial

Serial Port
Pin Denitions
Pin# Denition Pin# Denition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 N/A
System Management Bus (SMBus) Header
A SMBus (I
2
C) header for IPMI 2.0 is located at JIPMB1. Connect the appropriate cable here
to use the IPMB I
2

External I
2
C Header
Pin Denitions
Pin# Denition
1 Data
2 Ground
3 Clock
4 No Connection