SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
80
CPU P State Control (Available when "Power Technology" is set to
Custom)
SpeedStep (PStates)
dissipation. Please refer to Intel’s website for detailed information. The options are Disable
and Enable.
EIST PSD Function (Available when "SpeedStep" is set to Enable)
the voltage and frequency of the processor will be reduced when it is in operation. This
are HW_ALL, SW_ALL and SW-ANY.
Turbo Mode (Available when "SpeedStep" is set to Enable)
manufacturer. The options are Disable and Enable.
Hardware PM (Power Management) State Control (Available when
"Power Technology" is set to Custom)
Hardware P-States
If this feature is set to Disable, hardware will choose a P-state setting for the system based
on an OS request. If this feature is set to Native Mode, hardware will choose a P-state
setting based on OS guidance. If this feature is set to Native Mode with No Legacy Support,
hardware will choose a P-state setting independently without OS guidance. The options
are Disable, Native Mode, Out of Band Mode, and Native Mode with No Legacy Support.
CPU C State Control (Available when "Power Technology" is set to
Custom)
Autonomous Core C-State
Select Enable to support Autonomous Core C-State control which will allow the processor
core to control its C-State setting automatically and independently. The options are Enable
and Disable.
CPU C6 Report
Select Enable to allow the BIOS to report the CPU C6 state (ACPI C3) to the operating
Auto,
Enable, and Disable.
To Next Page
Loading...
