Supermicro SUPERSERVER 5018A-TN7B - Installing the System into a Rack; Installing the Chassis into a Rack

SUPERSERVER 5018A-TN7B User's Manual
2-4
2-3 Installing the System into a Rack
The system can be installed into a rack directly using screws.
Installing the Chassis into a Rack:
1. 
chassis into a rack.
2. Align the thru-holes of the chassis with the thru-holes of the rack.
3. Insert the mounting screws into the thru-holes in the front of the chassis and
through the thru-holes in the rack
Figure 2-1. Installing the Chassis into a Rack
Note: Figures are for illustrative purposes only. Always install servers into racks
from the bottom up.
Stability hazard. The rack stabilizing mechanism must be in place, or the

Failure to stabilize the rack can cause the rack to tip over.