Supermicro SUPERSERVER 5018A-TN7B - Overheating; Responses

3-3
Chapter 3 System Interface
Power: Indicates power is being supplied to the system power supply units. This
LED should normally be illuminated when the system is operating.
HDD
NIC1
Overheating
There are several possible responses if the system overheats.
Responses
If the server overheats
1. Use the LEDs to determine the nature of the overheating condition.
2. 
3. Check the routing of the cables and make sure all fans are present and operating
normally.
4. Verify that the heatsinks are installed properly.