6-1
Chapter 6: Advanced Chassis Setup and Maintenance
Chapter 6
Advanced Chassis Setup and Maintenance
This chapter covers the steps required to install components and perform
maintenance on the chassis. The only tool required is a Phillips screwdriver.
Review the warnings and precautions listed in the manual before setting up or
servicing this chassis. These include information in Chapter 4 and the warnings
and precautions listed in the setup instructions.
Figure 6-1. SC510 Chassis Front and Rear Views
Rear I/O Ports
PCIe Slot
Control Panel
6-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent
damage to any printed circuit boards (PCBs), it is important to handle them very
carefully.
ESD damage.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing any board from its antistatic bag.
To Next Page
Loading...
