Supermicro SUPERSERVER 5018A-TN7B - Installing the Hard Drives; Installing 3.5 Fixed Hard Drives

SUPERSERVER 5018A-TN7B User's Manual
6-4
6-4 Installing the Hard Drives
Installing 3.5" Fixed Hard Drives
Figure 6-3. Installing the 3.5" Hard Drive
Installing a Fixed 3.5" Hard Drive
The 3.5" hard drive screws directly into the chassis.
1. Power down the system and remove the power cord from the rear of the power
supply as described in Section 6-2. and remove the chassis cover.
2. Place the 3.5" hard drive in the chassis as illustrated above.
3. 