Supermicro SUPERSERVER 5018A-TN7B - Memory Support; Memory Population Guidelines

5-4
SUPERSERVER 5018A-TN7B User's Manual
5-4 Memory Support
The A1SRM-LN7F Series motherboard supports up to 64GB of DDR3 UDIMM
1600MHz in four memory slots. Populating these DIMM slots with memory
modules of the same type and same size will result in interleaved memory, which
will improve memory performance.
Note: Check the Supermicro website for recommended memory modules.
CAUTION
Exercise extreme care when installing or removing DIMM modules to
prevent damage.
Memory Population Guidelines
Follow the table below when populating the memory DIMMs.
Recommended Population (Balanced)
DIMMA1 Slot DIMMB1 Slot DIMMA2 Slot DIMMB2 Slot Total System
Memory
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
16GB 16GB 16GB 16GB 64GB
CPU
DIMMA1
DIMMA2
DIMMB1
DIMMB2
Figure 5-3, Memory Slot Labels