Supermicro SUPERSERVER 5018A-TN7B - Installing the Air Shroud; Checking the Server Airflow

SUPERSERVER 5018A-TN7B User's Manual
6-8
6-6 Installing the Optional Air Shroud
Figure 6-10. Air Shroud for SC510 Chassis
󰀩
           
closest to the power supply.
Use the clip on the fan housing to hold the air shroud in place. (See item 1 above)
Checking the Server Airow
• 
• Use only recommended server parts.
• 

• The control panel LEDs inform you of system status. See “Chapter 3: System
Interface” for details on the LEDs and the control panel buttons.
In most cases, the chassis power supply and fan are pre-installed. If you need to
install fans, continue to the System Fans section of this manual.
1