Supermicro SUPERSERVER 5018A-TN7B - Page 52

5-10
SUPERSERVER 5018A-TN7B User's Manual
Control Panel Connectors
Figure 5-5. Control Panel Header Pins
NMI
x (Key)
3.3 V
3.3 V stby
3.3 V stby
3.3 V stby
UID LED
3.3 V
Reset (Button)
Power (Button)
Ground
x (Key)
Power On LED
HDD LED
NIC7 LED (Activity)
NIC6 LED (Activity)
OH/Fan Fail
Power Fail LED
Ground
Ground
2 1
20 19
Power Button
The Power Button connection is
located on pins1 and 2 of JF1.
Momentarily contacting both pins will
󰀨  

a suspend button (with a setting in the
󰀨
power in the suspend mode, press
the button for at least 4 seconds.
Refer to the table on the right for pin

Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Reset Button
The reset button is located on pins
3 and 4 of JF1 and attaches to the
reset switch on the computer chassis.
See the table on the right for pin

Reset Button
Pin Denitions (JF1)

3 Reset
4 Ground