Supermicro SuperServer E200-8D - Page 63

63
Chapter 5: BIOS
Onboard LAN3 Option ROM
Use this option to select the type of device installed in LAN Port 3 used for system boot. The
options are Disabled and PXE.
Onboard LAN4 Option ROM
Use this option to select the type of device installed in LAN Port 4 used for system boot. The
options are Disabled and PXE.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary boot
device. The options are Onboard and Offboard.
Network Stack

Firmware Interface) for network stack support. The options are Disabled and Enabled.
*If the item above set to Enabled, the four items below will appear:
IPv4 PXE Support
Use this feature to enable IPv4 PXE boot support. The options are Enabled and Disabled.
IPv6 PXE Support
Use this feature to enable IPv6 PXE boot support. The options are Enabled and Disabled.
PXE boot wait time
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
Super IO Conguration
Super IO Chip AST2400
Serial Port 1 Conguration

Serial Port
Select Enabled to enable the selected onboard serial port. The options are Enabled and
Disabled.