76
SuperServer E200-8D User's Manual
• Secure Boot
• Vendor Keys
Secure Boot
Use this item to enable secure boot. The options are Disabled and Enabled.
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and Custom.
Key Management
Factory Default Key Provision
Select Enabled to install the default Secure Boot keys set by the manufacturer. The options
are Disabled and Enabled.
Enroll All Factory Default Keys
Select Yes to install all default secure keys set by the manufacturer. The options are Yes
and No.
Save All Secure Boot Variables
This feature allows the user to decide if all secure boot variables should be saved.
Platform Key (PK)
Set New Key
Select Yes to load the new platform keys (PK) from the manufacturer's defaults. Select No
Yes and No.
Key Exchange Key (KEK)
Set New Key
Select Yes to load the KEK from the manufacturer's defaults. Select No to load the KEK from
Append Key
Select Yes to add the KEK from the manufacturer's defaults list to the existing KEK. Select
Authorized Signatures
Set New Key
Select Yes to load the database from the manufacturer's defaults. Select No to load the DB
To Next Page
Loading...
