15
Chapter 1: Introduction
Installing Mounting Brackets (Optional)
The chassis includes mounting brackets that allow it to be mounted in a convenient place.
Use of these brackets is optional.
1. Choose the desired bracket mounting conguration. Note that the brackets can be
installed in two orientations--with the brackets extending out from the chassis (as Figure
1-5), or the brackets under the chassis (as Figure 1-6).
Figure 1-5. Installing Mounting Brackets
(Brackets extending out from the chassis)
2. Secure the brackets to the surface where you want the server to be mounted.
3. Install the server, using four screws through the holes in the brackets and screw them
into the chassis.
Figure 1-6. Installed Mounting Brackets
(Brackets under the chassis)
To Next Page
Loading...
