Supermicro SuperServer series User Manual

3
Preface
3
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It provides
information for the installation and use of the SuperServer E200-9AP. Installation and
maintenance should be performed by experienced technicians only.
Please refer to the server specications page on our website for updates on supported
memory, processors and operating systems (http://www.supermicro.com).
Notes
For your system to work properly, please follow the links below to download all necessary
drivers/utilities and the user’s manual for your server.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at:
support@supermicro.com
This manual may be periodically updated without notice. Please check the Supermicro website
for possible updates to the manual revision level.
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.

Supermicro SuperServer series Specifications

General

Manufacturer	Supermicro
Category	Server
Product Line	SuperServer
Processor Support	Varies by model (Intel Xeon, AMD EPYC)
Memory Support	Varies by model (DDR4, DDR5, ECC)
Storage Support	Varies by model (SAS, SATA, NVMe)
Management	IPMI, Redfish
Operating System Support	Windows Server, Linux, VMware
Power Supply	Varies by model (redundant, non-redundant, 80 PLUS, etc.)
Form Factor	Tower, Rackmount, Blade
Expansion Slots	Varies by model (PCIe, PCI-X, etc.)