Supermicro SuperServer series - Ports

30
SuperServer E200-9AP User's Manual
3.3 Ports
Figure 3-1. Rear input/Output Ports
DP and HDMI Ports
One HDMI and one DisplayPort are used to display both high denition video and digital sound
through an HDMI or DP-capable display, using a single HDMI or DP cable (not included).
The A2SAV-L supports HDMI Specication version 1.4b and DP 1.1a via N3700 processor
graphics controller.
LAN Ports
Two LAN ports (LAN1, LAN2) are located on the I/O back panel. They accept RJ45 type
cables.
Universal Serial Bus (USB) Ports
There are two USB 2.0 ports (USB0/1) and two USB 3.0 ports (USB2/3) located on the I/O
back panel. The motherboard also has a header for two USB 2.0 ports (USB8/9). The onboard
headers can be used to provide front side USB access with a cable (not included).
Serial Ports
There is one COM port (COM1) on the I/O back panel using an RJ45 connector, and two
COM headers (COM2, COM3) on the motherboard. COM2 supports RS-232 and COM3
supports RS-485 only.
1
98
7
6
5
4
3
2
10
Rear I/O Ports
# Description # Description
1. DisplayPort 6. USB1
2. HDMI 7. USB0
3 COM1 8 LAN1
4 USB2 9 LAN2
5. USB3 10 VGA