Supermicro X10DRS-2U - Universal Serial Bus (USB)

2-20
X10DRS-2U/3U/4U Motherboard User’s Manual
IPMI CODE
SAS CODE
MAC CODE
MAC CODE
M1
M2
M3
M7
M8
M9
M10
JPX1
JPL2
JPL1
JPME2
JPG1
JWD1
HDD_LED2
HDD_LED1
JTPM1
JSD2
FAN7
FAN8
FAN3
FAN6
FAN5
FAN2
FAN1
FAN4
JIPMB1
JBAT1
JBT1
JSLOT1
JKVM1
PM2
PM1
S-SATA1
S-SATA0
GUI
LEDS_OV1
X10DRS
REV:1.03
BAR CODE
BIOS
LICENSE
LAN3
JSACT1
BMC
LEDH LEDL
External
SAS
CPU1 PORT2
CPU2 PORT3
SLOT1 PCI-E 3.0 X24
FLASH
BMC
BIOS
VGA/USB1/2(2.0)COM1
USB3(3.0)
PCH
P2-DIMMG1 P2-DIMMH1
P2-DIMME1
P2-DIMMF1
P1-DIMMD1
P1-DIMMC1
P1-DIMMB1
P1-DIMMA1
SAS MEZZANINE Header
CPU2
JLAN1
JSD1
JPB1
LAN
CTRL
PLX
SAS
Expander
(Synch)
(PCI-E
Switch)
JDBS2
JSUART1
JSSDB1
JLAN2
JPWR1
JP1
JVRM1
JVRM2
1
1
1
1
CPU1
Battery
Universal Serial Bus (USB)
In addition to the two USB 2.0 ports (USB 1/2) located on the I/O backplane to pro-
vide rear USB 2.0 support, a Type A connector is also located on the motherboard
to provide USB 3.0 support (USB 3). (Cables are not included. See note below.)
Pin denition tables for USB connectors are below.
Back Panel USB (2.0) 0/1
Pin Denitions
Pin# Denition Pin# Denition
1 +5V 5 +5V
2 USB_PN1 6 USB_PN0
3 USB_PP1 7 USB_PP0
4 Ground 8 Ground
USB (3.0) USB 3
Pin Denitions
Pin# Description
1 VBUS
2 SSRX-
3 SSRX+
4 Ground
5 SSTX-
6 SSTX+
7 GND_DRAIN
8 D-
9 D+
1. USB 1/2 (2.0)
2. Type A USB 3 (3.0)
1
2
Note: Please connect the SMCI-proprietary cable (CBL-0218L) to the
connector JKVM1 to provide video display/COM port/USB 2.0 support
for your system. Please refer to our website at www.supermicro.com for
more cable info.