4-14
X10DRS-2U/3U/4U Motherboard User’s Manual
Restore NVDIMMs
Select Enabled for the BIOS to restore onboard NVDIMM memory support
automatically to enhance memory performance. The options are Disabled
and Enabled.
Interleave NVDIMMs
Select Enabled to congure onboard NVDIMM modules for interleaving
support to enhance memory performance. The options are Disabled and
Enabled.
Global Reset
Select Enabled to trigger a global reset instead of the normal reset to allow
ADR to save NVDIMM settings. The options are Disabled and Enabled.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for DRAM modules. The
options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.
Set Throttling Mode
Throttling improves CPU reliability and reduces power consumption via automat-
ic-voltage control during CPU idle states. The options are Disabled and CLTT
(Closed Loop Thermal Throttling).
Socket Interleave Below 4GB
Select Enable for the memory above the 4G Address space to be split between
two sockets. The options are Enable and Disable.
A7 Mode
Select Enable for A7 (Addressing) mode support to improve memory perfor-
mance. The options are Enable and Disable.
DIMM Information
This item displays the status of a DIMM module as detected by the AMI
BIOS.
• P1-DIMMA1 - P1-DIMMD1
• P2-DIMME1 - P2-DIMMH1
To Next Page
Loading...
