Supermicro X10SRM-F - Quick Reference Table; Jumper Description; Connector Description

14
X10SRM-F/-TF User Manual
Note: Table is continued on the next page.
Quick Reference Table
Jumper Description Default Setting
JBT1 Clear CMOS See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI Slots Pins 2-3 (Disabled)
JP3 M.2 Slots I
2
C Enable/Disable Pins 1-2 (Normal)
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN1/2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Manufacturing Mode Select Pins 1-2 (Normal)
JPUSB1 USB Wakeup Pins 1-2 (Enabled) (For USB4/5/8/9 only)
JVRM1 VRM SMB Clock (to BMC or PCH) Pins 1-2 (BMC, Normal)
JVRM2 VRM SMB Data (to BMC or PCH) Pins 1-2 (BMC, Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LE1 Rear UID LED Blue: On; Unit identied
LE8 HDD Access LED Green: On; HDD detected
LEDBMC BMC Heartbeat LED Green: Blinking; BMC normal
LEDPWR Onboard Power LED Green: Solid on; Power on
Connector Description
BT1 Onboard Battery
COM1/COM2 COM Port, COM Header
FAN1 ~ FAN5, FANA CPU Fan Headers, System Fan Header
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0 ~ I-SATA5 Intel® PCH SATA 3.0 Ports
I-SGPIO1/I-SGPIO2 Serial Link General Purpose I/O Connection Headers
JD1 Speaker/Power LED Indicator
JF1 Front Panel Control Header
JIPMB1 4-pin BMC External I
2
C Header (for an IPMI Card)
JL1 Chassis Intrusion Header
JMD1 M.2 Socket
JNVI2C1 NVMe I
2
C Header
JOH1 Overheat LED Indicator
JPCIE4 CPU PCI-E 3.0 X8 (in X8) Slot
JPCIE5 CPU PCI-E 3.0 X8 (in X8) Slot
JPCIE6 CPU PCI-E 3.0 X16 (in X16) Slot
JPH1/JPH2
4-pin Power Connectors for HDD use (To provide power from the motherboard to onboard HDD
devices.)
JPI2C1 Power I
2
C System Management Bus (SMB) Header