20
X10SRM-F/-TF User Manual
1.2 Processor and Chipset Overview
Built upon the functionality and capability of the Intel® Xeon® E5-1600/E5-2600 v3/v4
series processors (Socket R3) and the Intel C612 PCH, the X10SRM-F/-TF motherboard
provides system performance, power efciency, and feature sets to address the needs of
next-generation computer users.
With the support of the new Intel® Microarchitecture 22nm Process Technology, the X10SRM-
F/-TF dramatically increases system performance for a multitude of server applications.
The PCH C612 chip provides Enterprise SMbus support, including the following features:
• DDR4 288-pin memory support on Socket R3
• Hybrid clock support capable of extending to most 2S platforms
• Support for Management Engine (ME)
• Support of SMBus speeds of up to 400KHz for BMC connectivity
• Improved I/O capabilities to high-storage-capacity congurations
• SPI Enhancements
• Intel® Node Manager 3.0 for advanced power monitoring, capping and management for
BMC enhancement (see note below).
• BMC supports remote management, virtualization, and the security package for enterprise
platforms
Note: Note Manager support depends on the power supply used in your system.
1.3 Special Features
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State
To Next Page
Loading...
