Supermicro X10SRM-F - Cpu Configuration

X10SRM-F/-TF User's Manual
80
CPU Conguration
The following CPU information will display:
• Processor Socket
• Processor ID
• Processor Frequency
• Processor Max Ratio
• Processor Min Ratio
• Microcode Revision
• L1 Cache RAM
• L2 Cache RAM
• L3 Cache RAM
• CPU1 Version
Clock Spread Spectrum
If this feature is set to Enabled, the BIOS utility will monitor the level of Electromagnetic
Interference caused by the components and will attempt to reduce the interference whenever
needed. The options are Disabled and Enabled.
Hyper-Threading (ALL) (Available when supported by the CPU)
Select Enabled to support Intel Hyper-threading Technology to enhance CPU performance.
The options are Disable and Enable.
Cores Enabled
Set a numeric value to enable the number of cores. (Please refer to Intel's website for more
information.) Enter 0 to enable all cores.
Execute Disable Bit (Available if supported by the OS & the CPU)
Select Enabled to enable the Execute-Disable Bit which will allow the processor to designate
areas in the system memory where an application code can execute and where it cannot,
thus preventing a worm or a virus from ooding illegal codes to overwhelm the processor
or damage the system during an attack. The default is Enable. (Refer to the Intel
®
and
Microsoft
®
websites for more information.)