Supermicro X10SRM-F - Page 29

29
Chapter 2: Installation
8. Close the load plate with the CPU inside the socket. Lock the lever labelled 'Close 1st'
rst, then lock the lever labelled 'Open 1st' second. Using your thumb gently push the
load levers down to the lever locks.
Lever Lock
OPEN 1st
Lever Lock
Push down and
lock the lever
labelled 'Open 1st'.
OPEN 1st
7. With the CPU inside the socket, inspect the four corners of the CPU to make sure that
the CPU is properly installed.
Push down and lock the
lever labelled 'Close 1st'.
Gently close
the load plate.
OPEN 1st
1 2
3 4