Supermicro X10SRM-F - Page 42

42
X10SRM-F/-TF User Manual
Power Button
1
NIC1 LED
Reset Button
2
HDD LED
Power LED
Reset
PWR
UID SW
Ground
Ground
19 20
NIC2 LED
P3V3_STB
P3V3_STB
X
X
NMI
Ground
UID LED
OH/Fan Fail LED
P3V3
P3V3 PWR Fail LED
1
2
1. PWR Button
2. Reset Button
Reset Button
Pin Denitions (JF1)
Pins Denition
3 Reset
4 Ground
Power Button
Pin Denitions (JF1)
Pins Denition
1 Signal
2 Ground
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be congured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power when the system
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for
pin denitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin denitions.