Appendix D: UEFI BIOS Recovery
109
6. Using a different system, extract the BIOS package into a USB ash drive.
7. Press <Del> during system boot to enter the BIOS Setup utility. From the top of the tool
bar, select Boot to enter the submenu. From the submenu list, select Boot Option #1
as shown below. Then, set Boot Option #1 to [UEFI AP:UEFI: Built-in EFI Shell]. Press
<F4> to save the settings and exit the BIOS Setup utility.
5. After the BIOS recovery process is complete, press any key to reboot the system.
To Next Page
Loading...
