Supermicro X11SRA - DIMM Installation; DIMM Removal

32
Super X11SRA/-F/-RF User's Manual
JSTBY1
LE2
A
C
LE1
C
LEDPWR
LEDBMC
A C
JL1
JBT1
JSD1
JIPMB1
JRK1
JWD1
JPAC1
1
JVRM1
JPG1
1
JPME2
I-SATA3
I-SATA2
I-SATA1
JNVME1
PRESS FIT
JTPM1
AUDIO_FP1
I-SGPIO1
I-SGPIO2
SP1
+
BT1
+
JF1
JD1
FAN1
FAN2
FAN3
FAN4
FANA
JPWR1
JPWR2
JPI2C1
JTBT
MH13
MH10
MH11
MH12
X11SRA
REV:1.01
BIOS LICENSE
BAR CODE
IPMI CODE MAC CODE
DESIGNED IN USA
USB 4/5
USB 2/3
USB 0/1
COM1
I-SATA6~7
I-SATA4~5
I-SATA2~3
CPU M.2 PCI-E 3.0 x4
CPU M.2 PCI-E 3.0 x4
HD AUDIO
VGA
LAN1
LAN2
USB 10/11(3.0)
USB 12/13(3.1)
USB 8/9(3.0)
USB 6/7(3.0)
CPU SLOT6 PCI-E 3.0 x16
CPU SLOT4 PCI-E 3.0 x16
CPU SLOT2 PCI-E 3.0 x8 (IN x16)
PCH SLOT1 PCI-E 3.0 x4
DIMMD2
DIMMD1
DIMMC2
DIMMC1
DIMMB2
DIMMB1
DIMMA2
DIMMA1
CLOSE 1st
OPEN 1st
PCH
C422
JNVI2C1
KB/MOUSE
A
CPU
LGA 2066
BMC
J13
J12
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots, starting with DIMMA1,
DIMMB1, DIMMC1, DIMMD1, then DIMMA2,
DIMMB2, DIMMC2, DIMMD2. For best
performance, please use the memory
modules of the same type and speed.
2. Push the release tab outwards on the end of
the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the DIMM
module straight down into the slot until the
module snaps into place.
6. Push the release tab into the lock position
and secure the DIMM module into the slot.
DIMM Removal
Press the release tab on the end of the DIMM
module to unlock it. Once the DIMM module is
loosened, remove it from the memory slot.
Release Tabs
Notches
Press the DIMM module
straight down into the
memory slot.