Supermicro X11SRA - Quick Reference Table

12
Super X11SRA/-F/-RF User's Manual
Note: The table above is continued on the next page.
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open: Normal
Closed: Clear CMOS
JPAC1 Audio Enable Pins 1-2: Enabled
JPG1 VGA Enable Pins 1-2: Enabled
JPME2 Manufacturing Mode Pins 1-2: Normal
LED Description Status
LE1/LE2 M.2 Status LED Blinking Green: Read/Write
LEDBMC BMC Heartbeat Blinking Green: BMC Normal
LEDPWR Power LED Solid Green: Power On
Connector Description
AUDIO_FP1 Front Panel Audio Header
BT1 Onboard Battery
COM1 COM Header
CPU SLOT2 M.2 PCI-E 3.0 x8 (IN x16) PCI-E 3.0 x16 Slot (PCI-E 3.0 x8 link)
CPU SLOT4/6 M.2 PCI-E 3.0 x16 PCI-E 3.0 x16 Slots
PCH SLOT1 M.2 PCI-E 3.0 x4 PCI-E 3.0 x4 Slot
FAN1 ~ FAN4, FANA System/CPU Fan Headers
HD AUDIO High Denition Audio Header
I-SATA2~7 SATA 3.0 Connectors
I-SGPIO1/I-SGPIO2 Serial Link General Purpose I/O Headers
J12/J13 M.2 PCI-E 3.0 x4 Slots
JD1 Power LED Indicator/Speaker Header (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 System Management Bus Header (for IPMI only)
JL1 Chassis Intrusion Header
JNVME1 NVMe Connector (supports two connections)
JNVI2C1 NVMe I2C Header
JPI2C1 Power I2C System Management Bus (Power SMB) Header (for X11SRA-F/-RF only)
JPWR1 +12V 8-pin CPU Power Connector (Required)
JPWR2 24-pin ATX Main Power Connector (Required)
JRK1 Intel RAID Key Header
JSD1 SATA Disk-On-Module (DOM) Power Connector
JSTBY1 Standby Power Header
JTBT Thunderbolt Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Connector
LAN1/LAN2 RJ45 5GbE/1GbE LAN Ports