28
Super X11SRA/-F/-RF User's Manual
Installing a CPU Heatsink
1. Apply the proper amount of thermal grease to the heatsink.
2. Place the heatsink on top of the CPU so that the two mounting holes on the heatsink
are aligned with those on the retention mechanism. Tighten the screws in the following
order:
OPEN 1st
Note: Graphic drawings included in this manual are for reference only. They might look
different from the components installed in your system.
Screw #1
Screw #2
Screw #3
Screw #4
To Next Page
Loading...
