Supermicro X11SRA - Save & Exit

Super X11SRA/-F/-RF User Manual
98
4.8 Save & Exit
Select the Exit tab from the BIOS setup utility screen to enter the Exit BIOS Setup screen.
Save Options
Discard Changes and Exit
Use this feature to quit the BIOS Setup without making any permanent changes to the system
conguration, and reboot the computer. Select Discard Changes and Exit from the Exit menu
and press <Enter>.
Save Changes and Reset
When you have completed the system conguration changes, select this feature to leave the
BIOS setup utility and then reboot the computer, which will allow the new system conguration
parameters to take effect. Select Save Changes and Exit from the Exit menu and press
<Enter>.
Save Changes
After completing the system conguration changes, select this option to save the changes
made. This will not reset (reboot) the system.
Discard Changes
Select this feature and press <Enter> to discard all the changes and return to the AMI BIOS
utility Program.