Supermicro X11SRA - Headers

44
Super X11SRA/-F/-RF User's Manual
JSTBY1
LE2
A
C
LE1
C
LEDPWR
LEDBMC
A C
JL1
JBT1
JSD1
JIPMB1
JRK1
JWD1
JPAC1
1
JVRM1
JPG1
1
JPME2
I-SATA3
I-SATA2
I-SATA1
JNVME1
PRESS FIT
JTPM1
AUDIO_FP1
I-SGPIO1
I-SGPIO2
SP1
+
BT1
+
JF1
JD1
FAN1
FAN2
FAN3
FAN4
FANA
JPWR1
JPWR2
JPI2C1
JTBT
MH13
MH10
MH11
MH12
X11SRA
REV:1.01
BIOS LICENSE
BAR CODE
IPMI CODE MAC CODE
DESIGNED IN USA
USB 4/5
USB 2/3
USB 0/1
COM1
I-SATA6~7
I-SATA4~5
I-SATA2~3
CPU M.2 PCI-E 3.0 x4
CPU M.2 PCI-E 3.0 x4
HD AUDIO
VGA
LAN1
LAN2
USB 10/11(3.0)
USB 12/13(3.1)
USB 8/9(3.0)
USB 6/7(3.0)
CPU SLOT6 PCI-E 3.0 x16
CPU SLOT4 PCI-E 3.0 x16
CPU SLOT2 PCI-E 3.0 x8 (IN x16)
PCH SLOT1 PCI-E 3.0 x4
DIMMD2
DIMMD1
DIMMC2
DIMMC1
DIMMB2
DIMMB1
DIMMA2
DIMMA1
CLOSE 1st
OPEN 1st
PCH
C422
JNVI2C1
KB/MOUSE
A
CPU
LGA 2066
BMC
J13
J12
Headers
3
5
4
Fan Headers
The X11SRA/-F/-RF has ve fan headers (FAN1 ~ FAN4, FANA). All of these 4-pin fan headers
are backwards-compatible with the traditional 3-pin fan headers. However, fan speed control
is available for 4-pin fan headers only by Thermal Management via the IPMI 2.0 interface.
Refer to the table below for pin denitions.
Fan Header
Pin Denitions
Pin# Denition
1 Ground (Black)
2 2.5A/+12V (Red)
3 Tachometer
4 PWM_Control
6
Power LED Indicator/Speaker Header
Pins 1-3 of JD1 are used for power LED indicator, and pins 4-7 are for the speaker. Please
note that pins 4-7 are used with an external speaker. If you wish to use the onboard speaker,
you should close pins 6-7 with a cap. Refer to the tables below for pin denitions.
1
2
1. FAN1
2. FAN2
3. FAN3
4. FAN4
5. FANA
6. Speaker/Buzzer Header
PWR LED Indicator
Pin Denitions
Pin# Denition
1 VCC
2 FP_PWR_LED
3 FP_PWR_LED
Speaker Header
Pin Denitions
Pin# Denition
4 P5V
5 Key
6 R_SPKPIN_N
7 R_SPKPIN