Supermicro X11SRA - Page 86

Super X11SRA/-F/-RF User Manual
86
MMCFG Size
This feature determines the lowest MMCFG (Memory-Mapped Conguration) base assigned
to PCI devices. The options are 64M, 128M, 256M. 512M, 1G, and 2G.
MMIOHBase
Use this feature to select the base memory size according to memory-address mapping for
the I/O hub. The base memory size must be between 4032G and 4078G. The options are
56T, 40T, 24T, 16T, 4T, and 1T.
MMIO High Granularity Size
Use this feature to select the high memory size according to memory-address mapping for
the I/O hub. The options are 1G, 4G, 16G, 64G, 256G, and 1024G.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Enabled and Disabled.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
PCH Slot1: PCI-E 3.0 X4 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU Slot 2 PCI-E x8(IN x16) OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU Slot 4 PCI-E x16 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU Slot 6 PCI-E x16 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specied by the user. The options are Legacy and UEFI.
Onboard Lan Support 1/2
This feature allows the user to enable and disable onboard LAN 1/2 controller. The default
of Onboard LAN 1/2 support is Enabled.