Supero X10SAE - Chipset Configuration; Graphics Configuration

Chapter 4: AMI BIOS
4-11
C-State Pre-Wake
Select Enabled to support C State Pre-Wake State features. The options are
Enabled and Disabled
Package C-State limit
Select Auto for the AMI BIOS to automatically set the limit on the C-State package
register. The options are C0/C1, C2, C3, C6, C7 and Auto.
LakeTiny Feature
Select Enabled for LakeTiny feature support for C-State conguration. The options
are Enabled and Disabled.

Chipset Conguration
Warning! Setting the wrong values in the following sections may cause the system
to malfunction.

System Agent (SA) Conguration
The following System Agent (SA) information will be displayed:
•System Agent Bridge Name
•VT-d Capability
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.
This feature offers fully-protected I/O resource-sharing across the Intel platforms,
providing the user with greater reliability, security and availability in networking and
data-sharing. The settings are Enabled and Disabled.

Graphics Conguration
This item displays the following graphics information:
•IGFX VBIOS Version
•IGfx Frequency
Graphics Turbo IMON Current
Use this feature to set the limit on the current voltage regulator. Press "+" or "-"
on your keyboard to change this value. The default setting is 31.